Products

Products in this range

Ultra-pure Water System (RO + EDI)

RO + EDI continuous demineralisation, stable 10–18 MΩ·cm ultra-pure water

View details →

Ultra-pure Water System (Two-stage RO)

Double-pass RO for deep demineralisation, conductivity ≤1 μS/cm

View details →

Ultra-pure Water System (Integrated EDI)

Integrated RO + EDI + storage loop — a plug-and-play water station

View details →

Ultrafiltration System

Hollow-fibre UF skid, product turbidity below 0.1 NTU

View details →

Industrial Skid-mounted Ultrafiltration System

Skid-mounted twin-train design for high-flow continuous duty

View details →

80 m³/h Ultrafiltration System

80 tonnes per hour UF unit for medium industrial water stations

View details →

Reverse Osmosis System

Standard RO skid, salt rejection ≥97 %, 0.5–50 T/H

View details →

High-capacity Reverse Osmosis System

50–200 T/H RO system with multi-stage membrane arrangement

View details →

Applications

• Ultra-pure water for electronics and power
• Food, beverage and bottled water
• Pharmaceutical and chemical process water
• Boiler make-up and HVAC make-up
• Laboratory and hospital testing water

Process configuration follows the feed water analysis: softening ahead of RO for hard water, carbon or sodium bisulphite dosing for high chlorine, and EDI plus polishing mixed bed where high resistivity is required.

Products in this range

Automatic Water Softener

Automatic sodium-cycle softener, outlet hardness ≤0.03 mmol/L

View details →

Whole-house Central Water Softener

Whole-house softening that stops scale and protects appliances

View details →

Applications

• Pre-softening ahead of RO
• Boiler and heat exchanger make-up
• Hotel and hospital hot water scale prevention
• Textile, dyeing and laundry water
• Domestic whole-house softening

Selection requires feed hardness, daily consumption and peak flow. For hardness above 6 mmol/L or water high in iron and manganese, pre-treatment for iron removal is recommended.

Products in this range

Constant Pressure Booster System

VFD constant pressure with non-negative suction for buildings and plants

View details →

Applications

• Secondary supply for high-rise buildings and offices
• Domestic supply for schools, hospitals and hotels
• Plant process and fire make-up water
• Waterworks pumping stations
• Pump room retrofit in older estates

Please provide floor height, number of households or design flow, and mains inlet pressure. Fire supply must be a separate system to code, with standby pumps.

Products in this range

Integrated Wastewater Treatment Unit

Buried A/O + MBR integrated plant with reusable effluent

View details →

Applications

• Rural and township dispersed sewage
• Hospital, school and scenic area sewage
• Livestock, slaughterhouse and food processing effluent
• Motorway service areas and toll stations
• Water reuse and landscape make-up

Please provide flow, water quality, discharge standard and site conditions. In cold regions insulation or an indoor location is recommended, with access for sludge removal.

Products in this range

MBR Membrane Modules

PVDF curtain and flat-sheet modules, stable flux and fouling resistance

View details →

Applications

• Integrated wastewater treatment units
• Municipal wastewater upgrading
• Hospital and industrial park water reuse
• Landfill leachate treatment
• Black and odorous water remediation

Flux is designed from water quality and operating mode, with on-line backwash and periodic chemical cleaning. Feed should pass 1–3 mm fine screening first.

Products in this range

HM Series Ultrafiltration Membrane Elements

Hollow-fibre UF elements in multiple sizes for standard pressure vessels

View details →

Applications

• RO pre-treatment
• Municipal and rural drinking water
• Water reuse and landscape water
• Food and beverage clarification
• Seawater desalination pre-treatment

Transmembrane pressure must be controlled with regular backwash and chemical cleaning (sodium hypochlorite plus citric acid). Oily or high-solids feed needs flotation or settling first.

Products in this range

Toray RO Membrane Elements

Toray ROMEMBRA spiral elements — high rejection at low pressure

View details →

DuPont (Dow) RO Membrane Elements

DuPont FilmTec elements — stable rejection, fouling-resistant options

View details →

HM RO Membrane Elements (4 / 6 / 8 inch)

BW and LP brackish water membranes — low pressure, good rejection

View details →

Applications

• Industrial pure and ultra-pure water
• Brackish water and groundwater desalination
• Seawater desalination
• Food and beverage concentration
• Desalination for water reuse

Element selection depends on feed salinity, temperature, SDI and free chlorine. Control recovery and dose antiscalant in operation; store elements away from light and frost.

Products in this range

IONPURE EDI Stacks

Genuine IONPURE EDI stacks for continuous ultra-pure water without regeneration

View details →

EDI Stack Repair and Regeneration

Diagnosis, repair and regeneration to extend EDI stack life

View details →

Kelason EDI Modules

Domestic EDI modules with power supply and controls, cost-effective

View details →

Applications

• Ultra-pure water for electronics
• Pre-treatment for pharmaceutical water for injection
• Laboratory and hospital testing water
• Power plant boiler make-up
• Repair and upgrade of existing EDI systems

EDI feed must be RO permeate (conductivity <10 μS/cm, hardness <0.5 mg/L, free chlorine <0.05 mg/L). For repair, please provide the fault symptoms and operating parameters.

Products in this range

Quartz Sand Filter Media

Hard quartz sand that traps suspended solids and cuts turbidity

View details →

High Iodine Value Activated Carbon

High iodine coconut carbon for chlorine, organics and taste removal

View details →

Industrial Columnar Activated Carbon

High-strength extruded carbon for continuous air and water treatment

View details →

Manganese Sand Filter Media

Natural manganese sand for iron and manganese removal

View details →

Applications

• Multi-media filters and sand tanks
• Iron and manganese removal from groundwater
• Activated carbon adsorption and decolourisation
• Guard filtration ahead of RO
• Swimming pool and landscape circulation

Fill quantities are calculated from vessel diameter and bed depth; standard packing is 25 kg or 50 kg. Backwash activated carbon thoroughly before use to remove fines.

Products in this range

MB400 Polishing Mixed Bed Resin

Electronic-grade polishing resin, product up to 18 MΩ·cm

View details →

Water Softener Salt

High-purity regenerant salt, efficient and non-caking

View details →

001×7 Cation Exchange Resin

Strong acid cation resin for softening and demineralisation

View details →

Applications

• Resin filling for automatic softeners
• Mixed bed and polishing bed ultra-pure water
• Boiler make-up demineralisation
• Consumables for laboratory water systems
• Regenerant salt for softeners

Soak and convert resin in brine before filling. Polishing resin should be fed with RO permeate to avoid organic and chlorine fouling.

Products in this range

Pleated Filter Cartridges

Pleated membrane cartridges with large area and stable rating

View details →

Wound Filter Cartridges

Polypropylene wound cartridges, high pressure resistance, washable

View details →

PP Melt-blown Filter Cartridges

Gradient-structure PP cartridges, economical and reliable

View details →

Applications

• RO guard filtration
• Precision filtration of UF permeate
• Food and beverage final filtration
• Plating and coating bath filtration
• Pre-filter replacement in water purifiers

Replace cartridges on differential pressure (typically at 0.1 MPa). Connections include flat, 222 and 226 — please state rating and length when ordering.